Computer Won’t Turn On — Fort Lauderdale Call and Occam’s Razor
Computer won’t turn on repair in Miami and Broward — this kind of call comes in regularly. But every now and then, the solution is so simple it makes you smile.
Fort Lauderdale. Client calls, says the computer won’t turn on. Asks if we can come out for a diagnostic. We warn him upfront: depending on what we find, the machine might need to come with us. When a PC won’t start, it can mean serious things — motherboard, power supply, something burned. We prepare people for that possibility.
He agreed. I came out personally.
Occam’s Razor — the Most Useful Tool in Diagnostics
There’s a principle called Occam’s Razor. The simplest explanation is usually the correct one. If you hear hoofbeats, don’t imagine zebras.
Computer won’t turn on. Where do you start?
Not with the motherboard. Not with the capacitors. Not with the GPU or the RAM or any of the dozen things that could theoretically cause a no-POST situation.
You start with power. Because in twenty years of doing this, I’ve shown up to calls where the fix was flipping a switch on a power strip. It happens more than you’d think. People feel embarrassed when it turns out to be that simple. They shouldn’t — these things get overlooked, especially if the setup hasn’t been touched in a while.
So: power strip first. Then the power supply. Then the power button.
How to Check a Power Supply Without Equipment
Testing a power supply on-site without a dedicated tester is straightforward if you know the trick. Take a paper clip, bend it into a U shape, and bridge the green wire and any black wire on the 24-pin ATX connector. Plug the PSU in. If the fan spins — the power supply is alive.
This one was alive. Fan came on immediately.
So the power supply wasn’t the problem.
Computer Won’t Turn On — the Real Culprit
Power strip — fine. Power supply — fine. That leaves the power button.
Florida humidity does things to electrical contacts over time. Oxidation, corrosion, subtle degradation that builds up slowly until one day a connection that worked fine yesterday simply doesn’t close the circuit anymore. Add a bump, a nudge, maybe someone moved the case slightly — and a marginal contact becomes no contact at all.
The button wasn’t broken. It just wasn’t making contact with the motherboard header when pressed. No signal, no startup, nothing. From the outside: completely dead machine.
Cleaned the contacts, reseated the connector, tested. Pressed the button.
It started.
While We Were in There
Opened the machine up properly while everything was accessible. Full cleaning — dust out of every corner, power supply blown out. Thermal paste replaced on the CPU and the GPU while we were at it.
The machine isn’t a gaming rig — it’s a desktop that leans in that direction aesthetically but runs standard office workloads. Priced accordingly: $220 for everything. Button repair, full cleaning, thermal paste on both CPU and GPU, power supply cleaned.
Not a bad outcome for a call that started with “my computer is completely dead.”
The Diagnostic Process — Why Order Matters
This is worth writing down because people skip steps and end up spending money they didn’t need to spend.
When a computer won’t turn on, check in this order:
- Power strip / surge protector — is it on, is it functional, is the outlet live
- Power supply — paper clip test, does the fan spin
- Power button — connection to motherboard header, contact condition
- Motherboard — only after the above are confirmed working
Most no-power calls resolve somewhere in the first three steps. Jumping straight to “it must be the motherboard” wastes time and money. Experience teaches you to work from simple to complex — not because complex problems don’t exist, but because simple ones are far more common.
Twenty years in, I still check the power strip first. Every time.
Fort Lauderdale, Done
Client was relieved. Machine stayed home with him — no pickup needed, no waiting. Same visit, problem found, problem fixed.
If your computer won’t turn on — don’t assume the worst before checking the obvious. And if you’ve already checked the obvious and still have nothing, that’s when you call us.
We come out, we go through it step by step, and we tell you exactly what’s wrong before anything gets replaced. Pickup and delivery are free when needed.
Miami, Broward, Palm Beach — Fort Lauderdale included.
Contact us or message on WhatsApp.



